"2835" Series

When the going gets thick, this pump gets going. Count on it every time.


Performance:

  • Port Connection: 1-1/2" NPT 
  • Theoretical Capacity: 0.0063 GPR (23.8 CC/REV)
  • Maximum Speed: 1800 RPM
  • Maximum Flow at Maximum Speed (0 Discharge Pressure): 11.3 GPM (2.57 M3/HR)
  • Maximum Pressure: 75 PSI (5.2 Bar)


Typical Applications

  • Designed for pumping viscous liquids
  • Operates at standard motor speeds for viscous fluids up to 100,000 SSU
  • Materials include: roofing compound, molasses, honey, and feed supplements


Materials of Construction:

  • Cast iron housings
  • Hardened steel shafts
  • Hardened steel gears
  • Iron journal bearings
  • Buna case O-Rings
  • Graphite impregnated Teflon gland packing


Options:

  • Directly couples to standard electrical motor
  • Integral pressure relief valve
  • May be driven by a gasoline engine

"3800" Series

Sealed Bearing Pumps


Performance:

  • 4 sizes available
  • 3” or 4” NPT port sizes
  • Flows up to 540gpm
  • Pressures up to 125psi
  • Bi-directional rotation


Typical Applications:

  • Oil field applications including light and heavy crude oils
  • Kerosene mixtures
  • Condensates
  • Hot Oil


Materials of Construction:

  • Cast iron housings
  • Hardened cast iron gears
  • Haredened steel shafts
  • External ball bearings
  • Viton and HNBR lip seals


Options:

  • Wear plates available
  • Hardened steel gears available

"4400" Series

Tank truck pumps for fleets hauling crude oil, condensate, waste oil, and other abrasive materials.

Heavy Duty Oilfield Pump

 

Performance:

  • 3” or 4” NPT port sizes
  • Flows up to 500gpm
  • Pressures up to 100psi
  • Temperatures up to 250F
  • Speeds up to 1000rpm


Typical Applications:

  • Tank truck pumps for hauling crude oil
  • Condensate
  • Well treatment chemicals
  • Produced water
  • Waste oil
  • Other abrasive liquids


Materials of Construction:

  • Cast iron housings
  • Hardened steel gears
  • Hardened steel shafts
  • External ball bearings
  • Graphite impregnated Teflon gland packing
  • HNBR lip seals


Options:

  • PTO shaft drive or hydraulic motor drive
  • Integral hydraulic motor mounts for SAE B or SAE C size motors
  • High or low drive shaft position
  • Air pressurized oiler system is available
  • Adjustable air regulator with gauge ensures optimal oil flow

 

"5600" Series

For your high solid & heavy liquid transfer duties.


Performance:

  • 0.58 GPR
  • 3” NPT port
  • Flows to 232 GPM
  • Pressures to 100 PSI
  • Bi-directional
  • 400rpm max


Typical Applications:

  • Fertilizers
  • Paper pulps
  • Waste oils, tallow, etc.
  • Sealant coating
  • Oil field service
  • Brine and raw water
  • Sludge and slurry
  • Molasses feeds


Materials of Construction:

  • Cast iron housings
  • Gears are Buna coated cast iron
  • Bronze bearings
  • Graphite packing
  • Interchangeable with Bowie 3300


Options:

  • Direct couple hydraulic motor drive bracket (SAE A or B)
  • Easy field conversion between mechanical seal and packing
  • Carbon glass filled Teflon bearings
  • External greased bearings
  • Triple-lip seal
  • Chrome plated wear plates
  • Stainless steel shafts
  • Bi-Directional relief valve

2001 Type 10

Providing Trouble Free Lacquer Application for over 45 Years

 

Performance:

  • Capacity: 0-5gpm, 19 l/m
  • Pressure: 1200psi, 81.6 bar
  • Temperature: 450F, 232C
  • NPT port sizes 3/8”
  • Direct motor speeds


Application:

  • Aluminum can lacquer injection
  • Materials of Construction:
  • Cast iron housings
  • Hardened steel shafts
  • Hardened steel gears
  • Hardened cast iron bearings
  • Double hard faced mechanical seal
  • EPDM seals and “O” rings


Options:

  • Foot mount motor driven assemblies
  • Integral pressure relief valve
  • Mechanical seals or lip seals
  • Many unique, application-specific materials of construction available


(Note: some options not available on all sizes)